 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| 10 ~ 12W AC-DC Single Output Wall-mounted type Features : Universal AC input / Full range GS12E series No load power consumption< 0.3W/240VAC Pass energy star level IV for full series Meet EISA 2007 (Energy Independence and Security Act) 2 pole EURO plug Class power (without earth pin) Protections: Short circuit / Overload / Over voltage / Over temperature Fully enclosed plastic case Approvals: TUV / CB / CE Pass LPS for full series 2 years warranty SPECIFICATION ORDER NO. SAFETY MODEL NO. DC VOLTAGE RATED CURRENT CURRENT RANGE OUTPUT RATED POWER VOLTAGE TOLERANCE Note.3 LINE REGULATION LOAD REGULATION Note.4 Note.5 TUV Rheinland Product Safety geprUfre Sicherheit GS12E05-P1I GS12E05 5V 2.0A 0 ~ 2.0A 10W 5.0% 1.0% 5.0% GS12E07-P1I GS12E07 7.5V 1.6A 0 ~ 1.6A 12W 90mVp-p 4.0% 1.0% 4.0% GS12E09-P1I GS12E09 9V 1.33A 0 ~ 1.33A 12W 90mVp-p 4.0% 1.0% 4.0% GS12E12-P1I GS12E12 12V 1.0A 0 ~ 1.0A 12W 120mVp-p 3.0% 1.0% 3.0% GS12E15-P1I GS12E15 15V 0.8A 0 ~ 0.8A 12W 150mVp-p 3.0% 1.0% 3.0% GS12E18-P1I GS12E18 18V 0.67A 0 ~ 0.67A 12.06W 180mVp-p 3.0% 1.0% 2.0% GS12E24-P1I GS12E24 24V 0.5A 0 ~ 0.5A 12W 200mVp-p 3.0% 1.0% 2.0% RIPPLE & NOISE (max.) Note.2 75mVp-p 500ms, 20ms, 10ms/115VAC at full load SETUP, RISE, HOLD UP TIME 500ms, 20ms, 30ms/230VAC 90 ~ 264VAC 135 ~ 370VDC VOLTAGE RANGE FREQUENCY RANGE INPUT EFFICIENCY (Typ.) AC CURRENT INRUSH CURRENT (max.) LEAKAGE CURRENT (max.) OVERLOAD PROTECTION OVER VOLTAGE OVER TEMPERATURE Note.6 WORKING TEMP. WORKING HUMIDITY 47 ~ 63Hz 72% 0.31A / 115VAC 75% 0.16A / 230VAC 45A / 230VAC 76% 77% 79% 80% 80% COLD START 25A / 115VAC 0.25mA / 240VAC >105% rated output power Protection type : Hiccup mode, recovers automatically after fault condition is removed 115% ~ 135% Protection type : Clamp by zener diode U1 Tj 140 typically (U1) Detect on main control IC Protection type : Shut down o/p voltage, recovers automatically after temperature goes down 0 ~ +50 (Refer to output load derating curve) 20% ~ 90% RH non-condensing ENVIRONMENT STORAGE TEMP., HUMIDITY -20 ~ +85 , 10 ~ 95% RH TEMP. COEFFICIENT 0.03% / (0 ~ 40 ) 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes VIBRATION SAFETY STANDARDS WITHSTAND VOLTAGE SAFETY & ISOLATION RESISTANCE EMC EMI CONDUCTION & RADIATION HARMONIC CURRENT EMS IMMUNITY MTBF OTHERS DIMENSION PACKING PLUG CABLE TUV EN60950 -1 approved I/P-O/P:3KVAC I/P-O/P:100M Ohms / 500VDC / 25 / 70% RH Compliance to FCC part15 class B, EN55022 , EN61204-3 class B Compliance to EN61000-3-2,3 Compliance to EN61000-4-2,3,4,5,6,8,11, ENV50204, EN61204-3, light industry level, criteria A 1414.6Khrs min. MIL-HDBK-217F (25 ) 65*47*26.5mm (L*W*H) 0.15Kg ; 100pcs / 16Kg / CARTON Standard type P1I: 2.1 * 5.5 * 9.5mm turning fork type, center positive for stock ; Other type available by customer requested Standard type UL1185 6ft (4FT only for 5V output) for stock ; Other type available by customer requested CONNECTOR NOTE 1.All parameters are specified at 230VAC input, rated load, 25 70% RH Ambient. 2.Ripple & noise are measured at 20MHz by using a 12" twisted pair terminated with a 0.1uf & 47uf capacitor. 3.Tolerance: includes set up tolerance, line regulation, load regulation. 4.Line regulation is measured from low line to high line at rated load. 5.Load regulation is measured from 10% to 100% rated load. 6.The over temperature protection (OTP) is the built-in function of the control IC (U1). The activating level described above is based on the specification provided by the IC manufacturer. File Name:GS12E-SPEC 2008-05-06 10 ~ 12W AC-DC Single Output Wall-mounted type Mechanical Specification GS12E series Unit:mm UL1185 18AWG 1230 50mm for 5V UL1185 18AWG 1830 50mm for others 30 10mm 37.2 1 26.5 1 65 1 ID 2.1 x OD 5.5 C"+" 47 1 9.5 0.5mm Plug Assignment Standard plug: P1I (option) P1I P/N CENTER OUTPUT + Derating Curve Static Characteristics(24V) Ta=25 32 300 250 200 150 100 50 25 OUTPUT VOLTAGE (V) 100 28 24 20 16 12 8 70 0 10 20 30 40 50 50 70 90 110 120 140 160 180 200 220 240 264 Ta ( ) INPUT VOLTAGE(VAC)60Hz File Name:GS12E-SPEC 2008-05-06 OUTPUT RIPPLE (mVp-p) LOAD (%) |
Price & Availability of GS12E07-P1I
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |